Beko 260 100 310EN 310ml Allcon 10 Construction Adhesive

Beko 260 100 310EN 310ml Allcon 10 Construction Adhesive

£9.99 exc VAT £11.99 inc VAT

  • Product Ref: BEKO/A10

Product Details

Technical Data

CuringApprox. 3mm Allcon 10 per 24hours; approx. 70% surface bonding after 7 to 10 minutes, 100% cured after 30 to 45 minutes
BasisMoisture-curing polyurethane
DensityApprox. 1,4 g/cm3 (1400 oz/ft3)
TestedTest report in accordance with DIN EN 204 D4 (Waterproof gluing), according to WATT 91 (+80° C (+176° F))
SmellLow Odour
Storage LifeThe opened cartridge can be used for up to 10 months, unopened cartridge lasts for up to 1½ years
Skin Formation TimeApprox. 3 minutes under standard conditions (+23° C (+73.4° F) / 50% relative air humidity)
StorageDry, at room temperature
Gap BridgingApprox 1,0 cm
TemperatureResistant from -40°C (-40°F) to max. +80°C (+176°F) (short term: +120°C (+248°F))
ProcessableFrom +5° C (+41° F) to the max. +40° C (+104° F)
ViscosityPasty

Construction Adhesive

  • Tested according to WATT 91 DIN EN 204 D4, very low emission (acc. to GEV-EMICODE EC1), bonds nearly all materials, single component, easy handling, solvent-free, resistant to weather and aging, resistant to many chemicals, frost-proof, usable with natural stone.

Benefits of Use

  • Use with a standard caulking gun, can be put under stress after just 7 to 10 minutes, no primer required, replaces multiple other adhesives and glues, safe to use, always the right product to hand, the opened cartridge can be used up to 10 months; unopened cartridge lasts up to 18 months, minimum wastage, can be painted and varnished, suitable for indoor and outdoor use.

Areas of Application

  • Bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plasterboards, foam (EPS), hard foam, acrylic, insulation and much more.
Sorry, this item is currently out of stock.
We currently hold [remaining-stock] units of this item in stock. The remainder will be put on back order.
You cannot order more of this item than we currently hold in stock.
You must order at least [min-order-qty] of this product.
You must order at least [min-order-qty] of this product. We currently hold [remaining-stock] in stock. The remainder will be put on back order.

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK